MoS2 Ultrafine Powder
Properties:
-
Purity: 99.0% 纯度
-
Average Particle Size: ~90 nm 粒径
-
Specific Surface Area: ~35 m2/g 比表面积
-
Morphology: nearly spherical
-
Bulk Density: ~0.78 g/cm3 堆积密度
-
True density: 5.06 g/cm3 真实密度
MoS2 Ultrafine Powder is ideal to use for creating MoS2 solutions with applications ranging from electronics to energy storage. The powder may be sonicated in a range of liquid solvents, whereas the longer sonication takes place, the smaller the flake size in solution. Further, before sonication the solution will be silvery, and after it will turn a greenish. The solvents useful during sonication include benzaldehyde, isopropanol, acetone, methanol, and many others.
The liquid dispersion may then be used to create a thin film on the substrate of your choosing. These thin-films have a range of applications, such as transistors, solar cells, and energy storage devices.
MoS2 solution can also be used in composite materials.
The difference between our micropowders and ultrafine powders are their flake sizes. Ultrafine powders have smaller flakes, and create dispersions with smaller particle sizes after sonication than micropowder. Micropowders require more sonication and will result in flakes with larger lateral dimensions. Micropowder is a low-cost alternative to our ultrafine powder.
SEM image of MoS2 ultrafine powder
Applications:
Academic References:
Electrical Characteristics of Molybdenum Disulfide Flakes Produced by Liquid EJPoliation, Lee et al. Adv. Mater. 2011, 23, pp. 4178-4182
Gelatin-assisted fabrication of water-dispersible graphene and its inorganic analogues, Ge et al. J. Mater. Chem. 2012, 22, pp. 17619-17624
Preparation of High Concentration Dispersions of EJPoliated MoS2 with Increased Flake Size, O''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''Neill et al. Chem. Mater. 2012, 24, pp. 2414-2421
Two-Dimensional Nanosheets Produced by Liquid EJPoliation of Layered Materials, Coleman et al. Science, 2011, 331, pp. 568-571
|