Hampton 银弹 Silver Bullets

Hampton PEG/Ion • PEG/Ion 2 • PEG/Ion HT

PEG/Ion, developed by Hampton Research, is a crystallization screen designed to evaluate monodisperse, high purity Polyethylene glycol 3,350 and 48 unique salts representing a very complete range of anions and cations frequently used in the crystallization of biological macromolecules. The primary screening variables are PEG, ion type, ionic strength, and pH. More than 60% of the published crystallizations utilized PEG as a primary crystallization reagent and in approximately 50% of those reports, the PEG was combined with an ion as a secondary crystallization reagent. PEG/Ion reagents are formulated without a buffer and are not pH titrated.

PEG/Ion 2 is an extension to the fundamental crystallization strategy in PEG/Ion. PEG/Ion 2 reagents cover the monodisperse, high purity Polyethylene glycol 3,350 and an array of neutralized and pH adjusted organic acids, multivalent ions, a novel Citrate BIS-TRIS propane buffer system and pH (4 – 8.8). The formulation of PEG/Ion 2 was developed at Hampton Research. Each of the 48 reagents in PEG/Ion 2 contains PEG 3,350 as the polymer (precipitant). The concentration of PEG is varied from 12% w/v to 20% w/v depending upon the type and concentration of buffer/salt paired with the polymer. Thirteen of the forty-eight PEG/Ion 2 reagents contain a separate buffer component. The remaining PEG/Ion 2 reagents are buffered by the titrated organic acid salt. Six of these thirteen conditions feature a novel Citric acid BIS-TRIS propane (CBTP) buffer. The CBTP buffer uses Citric acid and BIS-TRIS propane as the acid base pair to create a two component buffer system effective across pH 2.5 to 9.5. The ratio of Citric acid to BIS-TRIS propane determines the solution pH. Thirty-five of the forty-eight PEG/Ion 2 reagents contain a neutralized or pH adjusted organic acid in the presence of the polymer. Neutralized organic acids are highly effective crystallization salts.¹ Four PEG/Ion 2 reagents feature polyvalent cations. Two of these reagents contain cation mixes, saving sample by screening six different cations with only two reagents. Tryptone, a casein digest combinatorial library of peptides, is included in PEG/Ion 2. PEG/Ion 2 reagents 1-30, 42, 45-47 are formulated without a buffer and are not pH titrated.

PEG/Ion contains 48 unique reagents, 10 ml each.

PEG/Ion 2 contains 48 unique reagents, 10 ml each.

PEG/Ion HT contains 1 ml of each reagent from PEG/Ion and PEG/Ion 2 in a single Deep Well block format.

Ready-to-use reagents are sterile filtered and formulated with ultra-pure Type 1 water, using the highest purity salts, polymers, organics and buffers. Individual reagents are available through the Hampton Research Custom Shop.

Crystals of Peptidoglycan Recognition Protein (PGRP) from camel milk grown using the Hampton Research PEG/Ion screen. Sharma, P., Singh, N., Sinha, M., Sharma, S., Perbandt, M., Betzel, C., Kaur, P., Srinivasan, A. & Singh, T.P. All India Institute of Medical Sciences, Department of Biophysics, New Delhi, India. CAT NO NAME DESCRIPTION HR2-126 PEG/Ion Screen 10 ml, tube format HR2-098 PEG/Ion 2 Screen 10 ml, tube format HR2-139 PEG/Ion HT 1 ml, Deep Well block format

Hampton晶体删选试剂

1．Screens 晶体删选试剂盒

2.Custom Shop Crystallization Reagents 结晶试剂盒中单独的试剂

3. Optimize™ Reagents晶体生长条件优化试剂

⑴ Optimize™ – Polymers聚合体

⑵ Optimize™- Organics (Volatile) 挥发性有机物

⑶ Optimize™- Organics (Non-Volatile)非挥发性的有机物

⑷ Optimize™- Salts 盐类

⑸ Optimize™- Buffers缓冲液

⑹ Optimize™- Solubilizing Agents (NDSB) 溶解试剂NDSB

⑺ Optimize™ – Reducing Agent还原剂-TCEP氢氯化物

⑻ Optimize™ – Cryoprotectants

⑼ Optimize™ – Oils用于结晶的油类

⑽ Optimize™ – Silica Hydrogel硅胶

⑾ Optimize™ – LM Agarose低熔点琼脂糖
5.Crystallization Plates, Hardware & Accessories结晶耗材
⑴ 24 Well Crystallization Plates 24孔晶体板-分悬滴和坐滴两种
⑵ 48 Well Crystallization Plates 48孔晶体板
⑶ 72 Well Crystallization Plates72孔晶体板
⑷ 96 Well Crystallization Plates 96孔晶体板等

Wizard Tube 
The Wizard™ Classic line of random sparse matrix screens is designed to increase your probability of producing crystals during the coarse screening phase when crystallizing biological macromolecules (proteins, nucleic acids, peptides, and combinations thereof).
The Wizard Classic reagents are proven to be a highly effective starting point in the screening of biological macromolecules. The Wizard Classic formulations include a large range of crystallants, buffers, and salts covering a broad range of crystallization space at pH levels from pH 4.5 to pH 10.5.Choose from Wizard Classic 1, 2, 3, or 4 non-overlapping formulations in matrix blocks or tubes.

Wizard Cubic LCP
The tools in the Wizard Cubic LCP (lipidic cubic phase) Kit enable researchers to prepare LCP-type crystallizations by hand. Ideal for low-protein experiments: effective protein volume for a single crystallization experiment is about 80 nanoliters. Wizard Cubic LCP Kit tools work especially well when traditional methods have failed to yield crystals. Lipidic cubic phase has worked well for the crystallization of 7TM membrane proteins (proteins with seven transmembrane helices). Four out of six GPCRs (G-protein coupled receptors), an important membrane protein class, and several microbial 7TM proteins have been crystallized using the LCP approach.

CRYO (I、II)
The Wizard Cryo™ line of random sparse matrix screens is designed for scientists who want to avoid the additional step of optimizing a cryoprotectant condition. Every Wizard Cryo formulation flash-freezes to a clear, amorphous glass in liquid nitrogen or in a cryo-stream at 100K. Crystals can be frozen directly from their growth drops, avoiding the additional step of pre-equilibration with an artificial cryo-condition that can damage the crystal. Eleven different cryocrystallants and sparing use of glycerol ensures a broad sampling of possible cryo conditions. Choose from Wizard Cryo 1 or 2 formulations in tubes or Wizard Cryo 1 and 2 together in a 96-well matrix block.

Hampton 24孔坐滴板 Cryschem Plate

Applications

 Sitting drop crystallization

  Heavy atom soaks

  Seeding

The Cryschem Plate is a 24 well sitting drop plate that is sealed with clear sealing tape. The polystyrene plate is supplied with a raised cover so the plate can also be sealed with vacuum grease and plain glass or plastic cover slides (22 mm diameter). The stackable, 24 well plates have distortion-free, flat bottom wells and a concave sitting drop post in the center of the well for concentric equilibration of the drop with the reagent. Each plate is individually sealed. The top of the plate and each of the 24 wells is a single, flat plane for smooth and easy seal application. Well spacing provides for a large seal area between wells to prevent cross contamination and evaporation.

上海金畔生物作为Hampton蛋白结晶产品的代理商，竭诚为您服务，欢迎新老客户咨询。

Cryschem Plate is large plate footprint with circular reagent reservoir. Cryschem plate approximate size: 15.1 cm x 10.6 cm x 2.2 cm. Approximate well size: 1.6 cm x 1.5 cm. Typical fill volume: 500 to 1,000 µl. Well capacity: 1.5 ml. Maximum drop volume on post: 40 µl. Recommended seal: HR3-511 Crystal Clear Sealing Tape (1.88 inch x 43.7 yard roll, with cutter) or HR4-511 Crystal Clear Sealing Tape (1.88 inch x 60 yard roll, without cutter).

Cryschem M Plate is microplate footprint with circular reagent reservoir. Cryschem M microplate approximate size: 128 mm x 86 mm x 14 mm. Approximate circular reservoir size: 15 mm wide x 9 mm deep. Typical reservoir volume: 500 µl. Well capacity: 1.1 ml. Maximum drop volume on post: 30 µl. Recommended seal: HR3-609 Crystal Clear Sealing Film (100 pack), HR4-521 ClearSeal Film (100 pack) or HR4-506 Crystal Clear Sealing Tape (3 inch x 55 yard roll, without cutter). HR4-508 Crystal Clear Sealing Tape (0.75 inch x 650 inch, with cutter) seals a single row at a time.

Cryschem S Plate is microplate footprint with square reagent reservoir. Cryschem S microplate approximate size: 128 mm x 86 mm x 14 mm. Approximate square reservoir size: 15 mm wide x 9 mm deep. Typical reservoir volume: 500 µl. Well capacity: 1.1 ml. Maximum drop volume on post: 30 µl. Recommended seal: HR3-609 Crystal Clear Sealing Film (100 pack), HR4-521 ClearSeal Film (100 pack) or HR4-506 Crystal Clear Sealing Tape (3 inch x 55 yard roll, without cutter). HR4-508 Crystal Clear Sealing Tape (0.75 inch x 650 inch, with cutter) seals a single row at a time.

Cryschem plate

Sigma代理  Abcam代理  CST代理  Santa Cruz代理  Biolegend代理 ebioscience代理  Invitrogen代理   millipore代理  BD流式抗体代理   GeneTe x抗体代理  Novus抗体代理   R&D代理 Biovison代理  Jackson代理  MBL抗体代理  ProSpec抗体代理  Bethyl抗体代理  Antibody Revolution抗体代理  Torrey Pines Biolabs代理  Amresco代理  MPbio代理  Laysan bio代理  NANOCS代理  Avanti代理  wako代理  lumiprobe代理（活性荧光染料）   NEB酶代理  Roche酶代理  Toyobo酶代理   USP代理  EP代理  Dr代理  TRC代理  TCI代理  Reagecon代理 Megazyme代理 Hampton代理（蛋白结晶） whatman代理（滤膜滤纸） GE代理（蛋白纯化） Corning康宁代理  Axygen代理 Falcon代理  NISSUI日水代理 Himedia代理 OXOID代理  BD培养基代理 Ludger代理（糖蛋白分析产品）  Eppendorf代理  Labnet代理  标准品代理 抗体代理 酶试剂代理  培养基代理 耗材代理 Elisa试剂盒代理 。

Hampton Siliconized Glass Cover Slides

ApplicationsHanging, sitting or sandwich drop crystallization
FeaturesHigh purity of glassSiliconized, hydrophobic glass surface0.22 mm & 0.96 mm glass thicknessThicker glass slides preserve temperature longer12 mm, 18 mm, & 22 mm glass diameterCircle & squareUV Compatible (>85% transmission)
12 x 0.22 mm Circle
18 x 0.22 mm Circle
22 x 0.22 mm Circle & Square

Description
Siliconized glass cover slides allow a droplet to be suspended in a position which provides near optimal conditions for vapor diffusion with the surrounding reservoir solution. These siliconized glass cover slides provide a consistent, high quality finish for crystallization experiments. The hydrophobic surface produces a drop which “stands well” and does not flatten on the glass. The siliconized surface prevents the adhesion of crystals and precipitate onto the glass surface. Use Dow Corning Vacuum Grease (HR3-510), Dow Corning 7 Release Compound (HR3-508), or immersion oil to seal cover slide to plate. Available in 12, 18 or 22 mm diameter circles and 22 mm diameter squares. Available in 0.22 mm or 0.96 mm glass thickness. The 0.96 mm thick slides are virtually unbreakable during crystallization handling.

The following slides are UV transmissable (>85%):
HR3-277 and HR3-279 – 12 mm x 0.22 mm Siliconized circle cover slides
HR3-231 and HR3-233 – 22 mm x 0.22 mm Siliconized circle cover slides
HR3-239 and HR3-241 – 18 mm x 0.22 mm Siliconized circle cover slides
HR3-215 and HR3-217 – 22 mm x 0.22 mm Siliconized square cover slides

Plain Glass Cover Slides
ApplicationsHanging, sitting or sandwich drop crystallization
Features
0.22 mm glass thickness
12 mm glass diameter
Hydrophilic glass surface
Circle & squareDescription
Plain, non-siliconized, hydrophilic glass cover slides. Useful for hanging drop, sitting drop, and sandwich drop vapor diffusion crystallization methods. The hydrophilic surface creates a drop which is more flat than a drop on a siliconized surface. This offers enhanced imaging for very small drops. Use Dow Corning® Vacuum Grease (HR3-510), Dow Corning® 7 Release Compound (HR3-508), or immersion oil to seal cover slide to plate.

HR3-209T 12 mm Plain circle cover slides for Tecan robot 5 oz case (~2,400 slides)

HR3-209T 12 mm Plain circle cover slides for Tecan robot 5 oz case (~2,400 slides)

PEN-VAC Kit
ApplicationsHolding and manipulating small, flat surfaces such as glass cover slides
FeaturesSelf-contained vacuumNo power neededCompactDescription
PEN-VAC is a great tool for handling small, flat surfaced objects such as plain and siliconized cover slides, as well as plastic slides. Simply depress the side button, touch the tip to the object to be lifted and release the button. PEN-VAC creates a totally self-contained vacuum that lifts up to 50 grams for up to one minute. Less than an ounce, the lightweight aluminum body fits in a pocket. No power supply needed. The kit includes one PEN-VAC with 5 3/4″ blue body, (3) angled and (3) straight probes with (2) each 1/8”, 1/4”, 3/8” diameter blue silicone vacuum cups . It is packaged in a clear plastic storage case.

HR3-251  PEN-VAC Kit

Hampton 0.1毫米50号玻璃毛细管

货号：HR6-104
包装：25 pack

• 英文名：0.1 mm Glass Number 50 Capillary
• 品牌：Hampton

Hampton代理–金畔生物

硼硅玻璃50号毛细管壁厚0.01毫米，全长80毫米+ / – 5毫米。提供外径从0.1毫米到2毫米的毛细管，用于X射线数据收集，晶体密度测量和晶体生长实验。毛细管可以用蜡，环氧树脂等密封材料封闭，防止水分和气体。

应用

X射线数据采集

液-液扩散结晶

凝胶针状结晶

特征

50号硼硅玻璃

壁厚 10微米

描述

硼硅玻璃50号毛细管一端呈漏斗形，另一端封闭，壁厚0.01毫米，全长80毫米+/-5毫米，外径从0.1毫米到2毫米。可嵌入，盛放，储存小分子和生物大分子晶体用于X射线数据收集，晶体密度测量和晶体生长实验。毛细管可以用蜡，环氧树脂和其它密封材料密封，防止水分和气体。

请参照“线性吸收系数µcm-1表“，以决定适合的玻璃/石英玻璃毛细管。本表展示的是X射线数据收集时的辐射吸收量。

0.1mm至2.0mm毛细管开口端的基础尺寸为：3.0+/-0.15mm外径 x 0.13+/-0.10 mm壁厚，直径为在毛细管封闭端40毫米处的测量值。

 

货号	产品说明	公差
HR6-104	Size: 0.1 mm – 25 pack	0.1 mm -0.075 / +0.075 mm
HR6-106	Size: 0.2 mm – 25 pack	0.2 mm -0.050 / +0.050 mm
HR6-108	Size: 0.3 mm – 25 pack	0.3 mm -0.050 / +0.100 mm
HR6-110	Size: 0.4 mm – 25 pack	0.4 mm -0.100 / +0.100 mm
HR6-112	Size: 0.5 mm – 25 pack	0.5 mm -0.100 / +0.100 mm
HR6-114	Size: 0.6 mm – 25 pack	0.6 mm -0.100 / +0.100 mm
HR6-116	Size: 0.7 mm – 25 pack	0.7 mm -0.150 / +0.150 mm
HR6-118	Size: 0.8 mm – 25 pack	0.8 mm -0.150 / +0.150 mm
HR6-120	Size: 0.9 mm – 25 pack	0.9 mm -0.150 / +0.150 mm
HR6-122	Size: 1.0 mm – 25 pack	1.0 mm -0.150 / +0.250 mm
HR6-124	Size: 1.5 mm – 25 pack	1.5 mm -0.250 / +0.250 mm
HR6-126	Size: 2.0 mm – 25 pack	2.0 mm -0.250 / +0.250 mm

Hampton CrystalCap™ SPINE HT

Applications

Cryocrystallography   低温结晶学

Features

		SPINE style sample mount for cryocrystallography
		CrystalCap SPINE HT attaches magnetically to CrystalCap Vial and Magnetic Goniometer Base     CrystalCap SPINE HT磁性地附着到CrystalCap小瓶和磁测角仪底座
		Hollowed out design compatible with SPINE style grippers, auto mounters and sample handlers
		2D alphanumeric coding for sample tracking & management
		Bar coded, color coded, alphanumeric, magnetic cap
		Color coded CryoLoop size

Hampton GRAS 5 • GRAS 6 Screens

Applications

 GRAS reagent crystallization screen for proteins, including monoclonal antibodies, where Polyethylene glycol is the primary reagent, sampling pH 4.5 to 10

. Identify GRAS based reagents that promote crystallization of biotherapeutics for bioprocess, bioformulation, and continuous flow manufacturing applications

Features

Description

GRAS Screen™ 5 and 6 were developed by Hampton Research for the crystallization of proteins, including monoclonal antibodies. Each of the chemicals in GRAS Screen 5 and 6 has been used under one or more of the following categories. As (1) a Generally Recognized As Safe (GRAS) substance, (2) a pharmaceutical excipient, (3) a normal physiological constituent, (4) a metabolic byproduct, and/or (5) a Everything Added to Food in the United States (EAFUS) substance.

GRAS Screen 5 samples four low molecular weight Polyethylene glycols (300, 400, MME 550, and 600) at three concentrations versus eight unique buffers encompassing pH 4.5 to 10. GRAS Screen 5 is supplied in a 96 Deep Well block format and is compatible with robotic and multi-channel pipet liquid handling systems. GRAS Screen 5 is compatible with vapor diffusion, free interface diffusion, and microbatch crystallization methods. For research use only.

GRAS Screen 6 samples four medium molecular weight Polyethylene glycols (1,000, MME 2,000, 3,350, & 4,000) at three concentrations versus eight unique buffers encompassing pH 4.5 to 10. GRAS Screen 6 is supplied in a 96 Deep Well block format and is compatible with robotic and multi-channel pipet liquid handling systems. GRAS Screen 6 is compatible with vapor diffusion, free interface diffusion, and microbatch crystallization methods. For research use only.

Hampton 蛋白结晶试剂–Crystal Screen

Crystal Screen • Crystal Screen 2 • Crystal Screen HT

Description
The Crystal Screen and Crystal Screen 2 reagent kits are designed to provide a highly effective and rapid screening method for the crystallization of macromolecules. The screens are simple and practical for finding initial crystallization conditions. The initial crystallization conditions for more than 1,000 proteins, peptides, oligonucleotides, and small molecules have been determined using Crystal Screen.

A highly effective approach to overcome the exhaustive search for suitable crystallization conditions is the use of a sparse matrix method of trial conditions that is biased and selected from known crystallization conditions for macromolecules. The formulation utilized in Crystal Screen and Crystal Screen 2 evaluates 96 unique mixtures of pH, salts, polymers and organics, and their ability to promote crystal growth.

Crystal Screen contains 50 unique reagents, 10 ml each and is based on the sparse matrix formulation first described by Jancarik and Kim in 1991.

Crystal Screen 2, an extension of Crystal Screen, contains 48 unique reagents, 10 ml each and is based on the formulation first described by Cudney et al in 1994.

Crystal Screen HT contains 1 ml each of reagents 1-48 from Crystal Screen and all 48 reagents from Crystal Screen 2 in a single Deep Well block format.

Ready-to-use reagents are sterile filtered and formulated with ultra-pure Type 1 water, using the highest purity salts, polymers, organics and buffers. Individual reagents are available through the Hampton Research Custom Shop.

Crystals of a carbohydrate processing enzyme grown using Hampton Research Crystal Screen. Shirley Roberts, York Structural Biology Laboratory, York, United Kingdom.

Crystal of zRFP574 red fluorescent protein grown using Hampton Research Crystal Screen 2. Pletneva et al. Acta Cryst. D62, 527-532 (2006). Nadya, Russian Academy of Science, Moscow, Russia.